In some type of home Furnishing, some substrates using wood particle board (PB), some substrates using density board. Then the two plate is what kind of good, when asked this question, the sales staff will say that they are good, the advantages and disadvantages of these kinds of sheet, consumers can pay attention to this problem.

      Solid wood particle board, is made of wood or other wood cellulose materials, the application of adhesives in the heat and pressure of the composite under the action of artificial board.

Advantages:

1) The wood particle board for cross scattered granular structure. So the nail holding ability is good, can nail nails, screws. The processing performance is obviously better than that of MDF.

2) The density of solid wood particle board is higher. The fiber particles of the board wood is larger, more retained the nature of the natural wood, the adhesive on the solid wood particle board is generally less than 5% and the environmental protection is better.

3)Wood particle board warpage, good dimensional stability, high strength, good stiffness, hang heavy clothing is not easy bending. Artificial board currently used in the European furniture market is mainly wood particle board.

Disadvantages: solid wood particle board flatness than the density board, make the curve and the shape is more difficult.

     Density board also named MDF. It is wood fiber or other plant fiber as raw material, after the break, fiber separation, drying after applying urea formaldehyde resin or other suitable adhesive, a man-made sheet after hot pressing.

Advantages: fine material quality, cutting edge seal is good, not easy to glue. Easy to be pressed into various shapes, easy to do modeling, so the back door or usually do more.

Disadvantages: because the substrate is powder as raw material, using glue more than particle board, more prone to environmental problems. Secondly, the more content of MDF glue, the little space of the internal structure, moisture resistance is poor, put a piece of density for 24 hours in the water, more than ten hours later obviously see four density board tilt up, deformation.

       In addition, consumers can learn more about this information in order to make better judgments.